Building Construction to Reduce Greenhouse Emissions
If you are really concerned about the environment around you, then you should pay attention to the increasing amount of gas emissions during the construction of residential buildings. Through out the buildings, there are many gases that are produced in large quantities and are harmful for the environment. So, are you aware of this fact? If so, then you should do something.
Each architect and engineer knows exactly what you have to do to reduce emissions of greenhouse gases significantly. But people do not want to compromise, either by changes in lifestyle or cash. We present some of the simplest ways to construct buildings to reduce emissions of greenhouse gases.
These are the things we could do to reduce global emissions:
1. Natural ventilation
Several years ago, even the small building in New York had an air duct. At this point, has not allowed the construction of toilets and kitchens without windows.The reason behind this, natural ventilation through windows helps reduce the effects of emissions of greenhouse gases. After a while mechanical ventilators have been approved for the same reason. Now is the time to put the old return policy. Natural ventilation and light should be accessible to all rooms.
2. Net zero energy for housing by 2016
Reach zero net energy means that the location in front of a large amount of energy in the network to carry. This is a supplemental indenture, from design to reduce waste, including photovoltaic solar energy sufficient to balance the little gas or energy is necessary. The zero of energy is achieved through the design presented considered to keep solar heat, straw bales and a remarkable 33.8 kilowatt array of photovoltaic solar energy.
3. Plan for people, not cars
The cars are superb transportation. They give us the freedom to go wherever we want and when we want. But that does not mean we should use every time. Emit many noxious gases into the atmosphere, so we try to minimize their use. For example, London or New York, people are ordinary cars, but only use them on weekends. So try to learn something from them, how they are concerned about the environment and aware of the means of reduction that might affect it. You can also do the same and save the environment.
4. Reoccupy the rust belt
To make your air clean and free of harmful gases, if the band had to re-occupy the areas of corrosion. There are a lot of infrastructure, that is, a lot of water, temperate climate, canals, power plants and elegant buildings are waiting to be fixed. Thus, the number of people followed the sun to the other with none of the above. What would it take to bring people back? You can do things like if enough people for a possible change laborious in Detroit, then Detroit will begin the exercise of firepower. In response to the growing population of people, useful infrastructure will grow. Employers will, among migrants. Use alternatives that reflect the feeling migrants arise. And finally the whole show becomes a success.
5. Design heat or cold proof houses
Did you know that air conditioners lift the load of harmful gases into the environment? These gases, mainly CFCs are the main cause of global warming.During the hottest days of the year when the electrical load is at its height, the atmosphere suffers greatly because of the electricity in the building with air conditioning. However, we have some good options to protect the environment from its dangers. The first thing we can do is plant the drill, as are the natural source of oxygen, therefore, help to absorb harmful gases. Second, we can obtain the natural conditioning when painting ceilings. Thus, by adopting these techniques can reduce emissions of harmful gases in the construction of buildings.